RSS
    Мир нефтепродуктов. Научно-технический журнал
    Рус | Eng

    Нефтепродукты, нефтехимия, нефтепереработка. Мир Нефтепродуктов. Научно-технический журнал

    • Главная
    • Мероприятия
    • О Журнале
      • Контакты
      • Редакционный совет
      • Авторам
      • Рекламодателям
    • DOI
      • 2025
        • 1-2025
          • Technology for obtaining a spherical reforming catalyst carrier with continuous regeneration
          • Study of the ZSM-5 catalyst, modified with ZrO2, for use in the process of alkylation of T-30 oil with catalytic cracking gases
          • Assessment of the compatibility of sealing materials with motor gasoline containing an octane-increasing additive based on ethylene glycol
          • Surface-active properties of nitrogen-containing oxyalkilates and polyelectrolytes
          • Genesis of industrial aluminum hydroxides and their potential for the production of Al2O3-supports of a given texture
          • The effect of antioxidant additives on the thermo-oxidative stability of vegetable oils
          • Comparative analysis of refinery configurations to meet the demand of the lebanese republic for petroleum products
      • 2024
        • 1-2024
          • Effect of domestic and foreign additives on the quality of diesel fuel depending on their dosage
          • Chemmotology as a science and its possible prospects
          • The Content and Application of ACEA Oil Sequences for Light-Duty and Heavy Duty Engines issued in 2021–2022 years
          • Options for upgrading the technological scheme of the process of fractionation of limit gases in order to save energy and increase the production of highly liquid products
          • High-octane components of motor gasolines as a solution to Russia’s fuel supply problems
          • Development and testing of energy-saving lubricant M-6Z/14D2K for highly loaded diesel engines
        • 2-2024
          • Evaluation of the effectiveness of sulfonate additives in lubricating oils
          • The effect of the technology for producing jet fuels on their hydrocarbon composition
          • Practical recommendations for vacuum distillation column calculation and its residue entrainment impact on vacuum gas oil quality estimation
          • Study of the amidation reaction of carboxylic acids and their derivatives
          • Features of the use of primary reference fuels used in diesel engine tests at IDT-90 installations
          • Study of bitumen modifier based on low molecular weight rubbers
          • Ways to develop hydrogen production technologies within the framework of the ESG concept
        • 3-2024
          • LUBRICANT COMPOSITION FOR GEARBOXES
          • LOW-TEMPERATURE CATALYTIC CRACKING OF FUEL OIL WITH HYDROGEN DONOR (METHANE) AS AN ALTERNATIVE METHOD FOR PROCESSING HEAVY OIL RESIDUE
          • CO-PROCESSING OF PETROLEUM FEEDSTOCK AND BIO-OIL BY DELAYED COKING
          • INVESTIGATION OF THERMAL TRANSFORMATION OF VACUUM RESIDUE IN THE PRESENCE OF REGENERATED SPENT HYDROTREATING CATALYST
          • ASSESSMENT OF THE EFFECT OF TAR ADDITIVES ON PROPERTIES BITUMEN
          • METHOD OF ELECTROCHEMICAL NEUTRALIZATION OF NATURAL GAS ODORANT STORAGE TANKS
          • STUDY OF THE RHEOLOGICAL PROPERTIES OF BASE OILS THICKENED WITH POLYMER ADDITIVES AT DIFFERENT TEMPERATURES
          • PROBLEMS OF CONFORMITY ASSESSMENT OF JET FUEL IN CONDITIONS OF SANCTIONS RESTRICTIONS
          • ENVIRONMENTAL FRIENDLY MOTOR OILS
        • 4-2024
          • RESEARCH OF ALTERNATIVE COMPONENTS OF ADDITIVE PACKAGE FOR TURBINE OILS
          • SOME ASPECTS OF TESTING FUEL FOR INTERNAL COMBUSTION ENGINES
          • CURRENT ISSUES OF ENSURING SAFETY OF PRODUCTION FACILITIES ORGANOALUMINUM COMPOUNDS AND WAREHOUSES OF ORGANIC PEROXIDES
          • ECONOMIC AND STATISTICAL ANALYSIS OF MODERN APPROACH TO RUSSIAN REFINERIES PERSONNEL MANAGEMENT AND STAFF POLICY
          • APPLICATION OF NICKEL CATALYSTS IN HYDROGENATION REACTIONS OF UNSATURATED HYDROCARBONS
          • INVESTIGATION OF THE COMPOSITION AND PROPERTIES OF NATURAL BITUMEN
          • FORMALDEHYDE-CONTAINING HYDROGEN SULFIDE ABSORBERS AS THE MAIN CAUSE OF DEPOSITS FORMATION OF PRIMARY OIL REFINING PLANTS EQUIPMENT
          • SULFONATE ADDITIVES TO MOTOR OILS
          • THE EFFECT OF PHOSPHORUS-CONTAINING ADDITIVES ON THE PERFORMANCE PROPERTIES OF ALKYLPHENOLATE GREASES
          • PILOT TESTING OF TURBINE OIL TANECO TURBINE 32 ON AN AEROKOM 43-125/10.2 UHL TURBOCOMPRESSOR
        • 5-2024
          • DETERMINATION OF UNSATURATED HYDROCARBONS IN OIL AND ITS PROCESSING PRODUCTS BY CAPILARRY GAS CHROMATOGRAPHY AND HIGH-PERFOMANCE LIQUID CHROMATOGRAPHY
          • PROMISING USE OF HIGHLY PERMEABLE DISUBSTITUTED POLYACETYLENES AS GAS SEPARATION MEMBRANE MATERIALS IN THE OIL INDUSTRY
          • ON THE METHOD OF FEED SUPPLY TO THE JET FUEL HYDRODEMERCAPTANIZATION SECTION OF AVT UNIT
          • BIO-OIL AS A SOURCE OF COMPONENTS CAPABLE OF IMPROVING THE ADHESION OF BITUMEN BINDERS
          • CHEMICAL AND PARTICLE SIZE DISTRIBUTION OF THE DISPERSED PHASE FORMED IN MOTOR OIL
          • SELECTION OF SYNTHETIC OIL FORMULATIONS FOR OIL-INJECTED SCREW COMPRESSORS WITH IMPROVED TRIBOLOGICAL CHARACTERISTICS
          • INVESTIGATION OF COMPRESSOR OILS TENDENCY TO THE HIGH TEMPERATURE DEPOSITS FORMATION
          • SCIENTIFIC APPROACH TO THE FORMATION OF CHEMMATOLOGICAL METHODS FOR ASSESSING THE EFFECTIVENESS OF ADDITIVES AND THE QUALITY OF MOTOR OILS
          • THE COMPREHENSIVE CHEMICAL METHODS TO MAINTAIN OF HYDROCATALYTICUNIT OPERATION
          • DETERMINATION OF MAXIMUM POSSIBLE JET FUEL OUTPUT FROM PIPELINE OIL TYPICAL FOR THE CENTER OF EUROPEAN PART OF THE RUSSIAN FEDERATION
        • 7-2024
          • SOME IDEAS ABOUT THE BEHAVIOR OF DETERGENT SOLUTIONS
          • ANALYSING THE IMPACT OF AN ADDITIVE BASED ON LOWER MOLECULAR WEIGHT POLYMER WITH RUBBER CRUMB ON THE PROCESS OF TAR OXIDATION BY STUDYING THE ADHESIVE PROPERTIES OF THE RESULTING BITUMEN
          • SOL-GEL METHOD AND ASPECT OF ITS CHOICE FOR BOEHMITE ALUMINUM HYDROXIDES PRODUCTION IN THE RUSSIAN FEDERATION
          • ASSESSMENT OF THE EFFECT OF THE OPERATING MODE OF CIRCULATING IRRIGATION ON THE CLARITY OF FRACTIONATION OF PRODUCTS IN A COMPLEX DISTILLATION COLUMN
          • TESTING AND IMPLEMENTATION OF NEW CATALYSTS FOR HYDROTREATING GASOLINE FRACTIONS
          • INCREASED PRODUCTION OF TS-1 JET FUEL BY COMPOUNDING KEROSENE OF VARIOUS ORIGINS
          • ISOPRENOIDS: GENERAL CHARACTERISTICS, METHODS OF DETERMINATION AND FIELDS OF APPLICATION
      • DOI 2023
        • №7 2023
          • HETEROATOM-CONTAINING ALKYLPHENOLYATES AS MULTIFUNCTIONAL ADDITIVES TO LUBRICANT OILS
          • DEVELOPMENT OF A METHOD FOR PRODUCTION OF PETROLEUM CERESINS BY DEEP DE-OILING OF PETROLATUMS
          • THE USE OF SCHIFF BASES AS CORROSION INHIBITORS
          • INSTALLATION TO PREVENT THE FORMATION OF EXPLOSIVE CONCENTRATIONS OF LIQUEFIED PETROLEUM GASES DURING THE DISCHARGE/FILLING OF THE TANKER TRUCK
          • SOLUBILIZATION OF WATER WITH DETERGENTS
          • OPERATIONAL ASSESSMENT OF THE QUALITY OF MOTOR OILS
        • №5 2023
          • Low-ash motor oils: technologies and application trends
          • Synthesis of benzotriazole derivatives and their effect on antioxidant properties of synthetic lubricant oil
          • Optimization of the process of obtaining aminomethoxy derivatives of menthol
          • Study of the catalyst ZSM-5, modified Zr, for the alkylation process of oil distillate fractions
          • Fuel gas production technology for the oil refining industry
          • Haw to resolve the conflict between accuracy and reliability, completeness and timeliness of measurement information
          • Optimization of the catalytic cycloalkylation process of phenol with 1-methylcyclopentene
          • Software tools for planning and optimization of technological schemes of refineries
          • Calculation of the effectiveness of the actual detergent effect of detergents
        • № 4-2023
          • Research of rheological properties of polymer-bitumen binders
          • Heat Treatment of Middle Distillate of Fluid Catalytic Cracking
          • Analysis and comparison of russian petroleum refining technologies
          • Assessment of the effect of fuel composition stability on CO2 emissions from refinery process furnaces
          • №5 2023
          • Investigation of the effect of polymer bitumen binders on road bitumen
          • Creation of new lubricating compositions based on waste oil regeneration product
          • A fundamental possibility of assessing the persistence of oils
        • №3-2023
          • Oil is an object of research. Analytical solutions
          • Investigation of new macroporous catalysts in the process of phenol alkylation by ethylene oligomers
          • Extraction of phenol from phenolcontaining waters when using extractants
          • The possibility of obtaining promising road bitumenes of PG grades under the conditions of the project for the installation of AVT-6 PJSC Bashneft-Ufaneftekhim
          • Obtaining modern brands of road bitumen in the conditions of deepening oil refining at the JSC «SNPZ»
          • Physico-chemical characteristics of oil samples of the Tagulskoye field
          • Evaluation of the reactivation efficiency of hydrotreating catalysts
          • The Central Volga Research Institute on Petroleum Refining: Achievements of Science for the Benefit of Production
          • Innovative achievements and developments of JSC «MidVolgaNIINP», implemented and planned for implementation
          • Development of engineering and technological support of oil refining processes
          • Development of the composition and technology for obtaining a synthetic component of the basis of hydraulic oils for special equipment
          • Experience in developing domestic packages of additives to hydraulic oils for industrial equipment and machinery
        • №2-2023
          • Chemmotological evaluation of oils and additives
          • Tech-economic evaluation of the use of oxygen-enriched stream of air for the combustion process in furnace heaters in order to decrease carbon emissivity
          • Synthesis and study of new thiocarbonic and thiocyanic acid derivatives as extreme pressure additives to motor oils
          • Review of the production of alkylphenolic lubricant additives
          • Catalytic Cracking Heavy Gas Oil Thermolysis
          • Investigation of thermal transformation of fuel oil in the presence of regenerated spent hydrotreating catalyst
          • Synthesis of 2-hydroxy-5(3-methylcyclohexyl)aceto- and benzophenones in the presence of a nano-catalytic system
          • Catalytic cycloalkylation of 4-hydroxyphenylpropionic acid methyl ester with methylcycloalkenes
        • №1-2023
          • Evaluation of the effectiveness of the developed package of additives PH-SL for engine oils for modern gasoline engines
          • Reducing coke formation at visbreaking units with the introduction of a passivator
          • Production components of motor fuels by processing blends of straight-run diesel fraction and sunflower oil on a zeolite catalyst
          • Synthesis of ep additives based on toluene sulfo chloride and methyl-, allyl xanthogenates
          • Principles of Development of a Set of Methods for Assessing Additives to Oils
          • Analysis of petroleum product production and consumption prospects in the Russian Federation
          • Medium alkaline alkylphenolate additives
          • Development of Engineering Solutions on Upgrading Quality of Products up to Standard Requirements at Design Capacity at Gas Processing Plants
      • DOI 2022
        • №1-2022
          • Overview of domestic developments in the field of anti-wear additives for diesel fuels with low sulfur content
          • Two-stroke gasoline engine lubricants
          • Dependence of properties of bituminous binders on composition of raw materials and conditions of oxidation
          • Comparative research of furnace tube of steam reforming 
          • The marginality of processing straight-run fractions of a modern oil refinery
          • Aromatic hydrocarbons of Azerbaijani oils and their impact on the performance of lubricating oils
        • №2-2022
          • Synthesis of esters of oxypropylated 2,2,5,5-tetramethylolcyclopentanol and investigation of them as base of promising lubricating materials
          • Optimization of the process of catalytic alkylation of cyclopentadiene by cyclohexyl alcohol
          • Biotechnological method of cleaning oil-contaminated soils
          • Study of oil fractions from petroleum of the Western Absheron field for their rational use
          • Synthesis and transformations of co-oligomers styrene with di-olefins modified by glycidyl ethers of 4-izopropenylphenol
          • Technical and environmental aspects of the new requirements for the performance properties of promising motor oils
          • The Modern Viscosity Modifiers of Engine Oils
        • №3-2022
          • Investigation of the process of coke formation with the introduction of specialized additives at tarp wismbraking installations
          • Synergetic effect in modification of oxidized road bitumens of different group composition
          • The composition and properties of oil fractions of unique azerbaijan oils (review)
          • Features of the I-IV groups of aromatic hydrocarbons of theWest-Aрsheronoil
          • Corrosion tests of working — preservation oil in various climatic zones
          • Some recommendations for improving the effectiveness of the assessment of the neutralizing ability of motor oils
          • Kinetic approach applied to the study of tribological characteristics of sulfonate greases
          • Engine oils aeration
        • №4-2022
          • New requirements for the properties of promising oils for automotive diesel and gasoline engines and methods of their testing
          • Obtaining mixed solvents from gas condensate
          • Status and possible prospects for the development of the domestic methodology for testing and evaluating motor oils
          • Industrial application of hydrogenation processes in processing of heavy residues of oil distillation by the example of TAIF-NK JSC
          • Optimization of the process of phenol alkylation by isoprene cyclodimer in the presence of KU-23 catalyst at a continuous operation plant
          • Study of bitumen cooling process in an above-ground tank in order to develop technologically and energetically efficient methods of maintaining its temperature
          • Stabilization of processes of thermal oxidative destruction of sealed liquids during operation
          • Changing the properties of narrow fractions in the process of hydrotreating light coking gas oil
        • № 5-6-2022
          • Effects of a reaction chamber on Visbreaking product stability
          • Synthesis and research of xanthogenic acid derivatives with different polar groups as additives to transmission oils
          • Study of propargyl ethers of aminomethylated alkenylphenols as corrosion inhibitors of ferrous metals
          • The results of the study of the effect oxidation processes on the viscosity-temperature characteristics of partially synthetic motor oils
          • Study of the kinetic regularities and mechanism of the cycloalkylation reaction of phenol with 1-methylcyclopentadiene
          • Optimization of the process of acylation of para-(1-methylcyclohexyl) phenol with acetic acid in the presence of the nano-catalytic system
          • Evaluation of the possibility of TOFA in the composition of anti-wear additive to diesel fuel with other vegetable oils
          • Improvement of physico-chemical properties of the straight run diesel by means of a magnetic field
          • Comparative study of protective and anticorrosive properties of sulfonate and phenolate greases
          • Evaluation of physico–chemical parameters of the sealing liquid AG-4I from the hot water tank of JSC “GSR CHP”
      • DOI 2021
        • №1-2021
          • Method for calculating the thrust and specific thrust of a double-flow gas turbine engine based on the results of tests at the laboratory unit «Flame»
          • Industrial technologies for processing waste oils
          • Study of the reactions of interaction of alkylxanthogenates with chlorine derivatives of glycerin and study of lubricating properties of synthesized compounds
          • Pre-fractionation concept in the scheme of straight—naphtha fractionation
          • Development prospects for the production of Russian biodegradable lubricants based on group V base oils
          • Study of the adsorption of anti-wear additives on the surface of butosyl in oil dispersions
          • Transformation of right-running gasoline fraction and gaskondensate on bimetallic catalysts based on zeolit ZSM-5
          • Determination of Organic Chloride Content in the Specialty Oilfield Chemicals Used in the Crude Oil Extraction, Transportation and Refining by X-ray Fluorescence Spectrometry
          • Production of alkylsalicyl acids by carboxylation of alkylphenols
        • №2-2021
          • Isomalk-3 and Isomalk-3R Technologies for Production of Individual Light Paraffins as the Feed for Petrochemical Facilities
          • Investigation of the qualities of some promising oils of the Absheron oil and gas region
          • The study of the qualities of light and oil fractions of Azeri oil
          • Influence of the synthesis method of tert-butylated triphenyl phosphates on the operational properties of fire-resistant fluids
          • Spectroscopic studies of oil products west-absheron oil fractions
          • Differences in the power parameters of diesel engines with a high pressure fuel pump and a battery fuel system for some types of fuel
          • Modern evaluation methods thermal oxidative stability of reactive fuels in dynamic conditions and prospects for their development
          • Stady of the thermal-oxidative stability of synthetic oils for aircraft gas turbine engines and helicopter gearboxes
          • The Necessity for Achieving Conformity of the Russian Turbine Oil Analysis Regulations with the Modern International Standards
        • №3-2021
          • Features of production and application of sulfonate greases
          • The Effect of Inorganic Solid Particles and Water on the Results of a Sulfur Content Measurement in Crude Oil with an X-ray Fluorescence Spectrometry
          • Development of technical requirements for the properties of automotive engine oils, taking into account trends in climate protection on the planet
          • Synthesis of s-tetramethyl–, ethylammonium-o-butylxantogenates and study of them as antimicrobial additives to lubricant-cooling fluids
          • Development of technology for producing base oil and environmentally friendly petroleum plasticizer
          • A study of thermal and antiwear properties of the oil compositions involving a condensed alkylphenol detergent additive
          • Upgrading of Heavy Oil under the exposition of Supercritical Water at Different Temperatures
          • Formulating regression equations for the virtual analyzers of the main quality factors of the alkylation process
        • №4-2021
          • How to certify reference materials: by voting or by exact weights
          • Effect of reaction time on the process of upgrading heavy oils in the presence and in the absence of oil soluble catalysts at 250 ° C
          • MELANGETM technology of the bitumen production in one-stage without oxidation
          • Overview of modern multifunctional gasoline additives. Market, key components, and methods for evaluating their effectiveness.
          • Digital monitoring system of equipment for the analysis of fuel and lubricants quality
          • Mixed esters of xanthogenic acids containing carbonyl, dithiocarbamine and thiocyane group and their research as additives improving tribological characteristics
        • №6-2021
          • Chemical and phase analysis of carbon deposits in the light of the development of compositions for the maintenance of automatic small arms
          • To the issue of the system of admission of new petrol, oil and lubricants for use in various types of equipment
          • Composite rubber — polymer — bitumen binder based on the feed materials obtained by MELANGE TECHNOLOGY 
          • Research of electric conductivity of esters of (C4-C10) terminal dicarboxylic acids depending on their chemical structure
          • Research of gas permeability of protective liquids of hot water supply tanks
          • Prediction of unit operation of vacuum distillate catalytic cracking using a non-stationary mathematical model
          • Determination of optimal conditions for hydrogenolysis of sulfur compounds of straight-run jet fuel
        • №5-2021
          • Study of phosphorus-containing compounds as anti-seize and anti-wear additives for transmission and engine oils
          • Features of the modern process of evaluation of motor oils References
          • Comparative assessment of the qualities of commercial and synthetic transformer oils
          • Features of technical requirements for operational properties automotive engine oils in new specifications
          • Study of the composition and environmental aspects of the use of pyrolysis distillate of the Ustyurt gas chemical complex
          • Influence of surfactants on the wettability of watered viscous oils of some fields in Azerbaijan
          • Involvement of products of thermal processing of polymer waste into the raw material pool of oil refinery plants
          • Issue of kerosene supply into live reflux flow of main rectification column of atmospheric vacuum pipestill process units
          • Comparative evaluation of various testing methods for FCC catalysts
      • DOI 2020
        • №1 2020
          • Industry 4.0. The main development directions of digitalization in refinery
          • Conceptual model of information system of Project Information Management
          • Cleaning of oil from hydrogen sulfide in hydrocyclone processors
          • Tert-butylated triphenyl phosphate — prospective synthetic fire resistant turbine fluid
          • Study of the technology of high-octane gasoline components with improved environmental properties
        • №2 2020
          • Effect of the design and technological parameters of a linear alkylbenzene sulfonation film reactor on the formation rate of by-products using the mathematical modeling method
          • Problems of regeneration of used oil oils
        • №3 2020
          • The modeling of Kazakhstan and West Siberian oil mixture vacuum gas oil catalytic cracking industrial unit
          • Changes of composition and quality indexes of diesel fuel versus the time of its oxidation and storage
          • Modification of low-octane gasoline to improve its environmental performance
          • Synthesis of new chloro derivatives of 1,3-dioxolane and obtaining on them basis load-carrying additives
          • Global requirements for properties and test methods engine oils for new engines
          • Engine Oil Licensing and Certification Systems in USA and Europe
          • Test Method for Stability Features of Aviation Hydraulic Fluids
        • №4 2020
          • Associated gas purification of hydrogen sulfide reagent «DARSAN-N»
          • Influence of Operational Factors on Evaluating Method Indicators of Thermal Oxidative Stability of Aviation Kerosene Under Dynamic Conditions
          • Explanation of Standard Specification for Performance of Active API Service Category Engine Oils
          • Thermolysis mechanism of fuel components for jet engines
          • Nanosized additives in lubricant
          • Modern environmental requirements for lubricating oils
        • № 5 2020
          • Development trends of lubricants in Russia
          • Environmental aspects of the use of lubricating oils and alternative energy sources on the way to improve transport sector of the world economy
          • Studies on the selection of domestic viscosity additives for multi-grade hydraulic oils HVLP
          • Equipment Identifying Vapor Leakages and Recovery of Petroleum Product Vapor When Stored
          • Basic Theoretical Thesises of Chemmotology
          • Hydraulic oils production technologies development for rocket and space technology control systems
        • №6-2020
          • Development of paraffin hydrocarbons isomerization processes
          • Current state of production of jet engine fuel
          • Graphene modified greases
          • The multifunction oil for US Army tank and automotive vehicles
          • Multifunctional alkylphenolate additives to motor oils
          • Intensification of the process of obtaining basic bases as the basic components of low-curing lubricants
          • Development of thickened semi-synthetic engine oil M-5z / 20 AERO for four-stroke gasoline engines aircraft piston of unmanned aerial vehicles (UAVs)
          • Assessment of ability to varnish turbine oils
          • Demetallization of oil and its fractions
      • № 7 2019
        • Simulation of enhanced oil recovery fields in the final stages of development
        • Improvement of the diesel fuel hydrodewaxing process effectiveness by the technological mode optimization through the use of the mathematical model
        • Problems of formation and separation of abnormally stable oil emulsions at oil treatment facilities
        • Optimization of the processes of catalytic decarboxylation of petroleum acids
      • 60 лет ПАО «Славнефть-ЯНОС»
        • Laboratory unit for evaluation of hydrogen sulfide additives-absorbers efficiency
        • Determination of octane number in the range from 100 to 110 without use of tetraethyl lead
        • Modernization of bitumen production at SlavneftYANOS PJSC
        • Study of fractional composition change during hydrotreatment of light coker gasoil at high pressure
        • Energy efficiency is the future
        • Repair department of the enterprise: today and tomorrow
        • Comparison of efficiency of diesel fuel fractions recovery at stages of atmospheric and vacuum oil distillation
        • Base for drilling fluids. From import substitution to export prospective
        • Process flow diagram of Slavneft-YANOS PJSC
        • Public joint stock company Slavneft-YANOS. Development history
      • Спецномер #2-2021 (ООО «ЛИНК»)
        • Production Service Centers – A Priority Trend in the Development of the Russian Engineering Centers in the Oil and Gas Sector based on the Sustainable Development Concept
        • Process service centers as an element of decarbonization strategy of the company
        • Setting the combustion mode in the refinery steam reforming unit furnaces along with the coiled pipe infrared imager control
        • The role of engineering centers in the continuous improvement system development at the oil and gas industry companies
        • The continuous improvement system effectiveness monitoring methods
        • Implementation of “PRORYV” project for complex improvement of refineries efficiency
        • LUKOIL Group Oil Refining Facilities Production Activity Planning System Improvement
        • Machine learning as a tool for optimization of technological processes
        • Digital information model as the basis for digital transformation of the enterprise
        • Shutoff and control valves airtightness test of the shutoff member through the ultrasonic testing method under continuous production processes
        • Application of thermal destruction processes for recycling of polymer waste
        • The composition and properties of oil fractions of unique azerbaijan oils (review)
        • Capital repair support
    • Архив
      • 2023
        • №1 2023
        • №2 2023
        • №3 2023
        • №4 2023
        • №5 2023
      • 2022
        • №1 2022
        • №2-2022
        • №3 2022
        • №4 2022
        • №5-6 2022
      • 2021
        • №6 2021
        • №5 2021
        • №4 2021
        • №3 2021
        • №2 2021
        • №1 2021
      • 2020
        • №6 2020
        • №5 2020
        • №4 2020
        • №3 2020
        • №2 2020
        • №01 2020
      • 2019
        • №7 2019
        • Июнь 2019
        • Май 2019
        • Апрель 2019
        • Март 2019
        • ФЕВРАЛЬ 2019
        • Январь 2019
      • 2018
        • Январь 2018
        • Март 2018
        • Февраль 2018
        • Апрель 2018
        • Май 2018
        • Июнь 2018
        • Июль 2018
        • Август 2018
        • Сентябрь 2018
        • Октябрь 2018
        • Ноябрь 2018
        • Декабрь 2018
      • 2017
        • Январь 2017
        • Февраль 2017
        • Март 2017
        • Апрель 2017
        • Май 2017
        • Июнь 2017
        • Июль 2017
        • Август 2017
        • Сентябрь 2017
        • Октябрь 2017
        • Ноябрь 2017
        • Декабрь 2017
      • 2016
        • Январь 2016
        • Февраль 2016
        • Март 2016
        • Апрель 2016
        • Май 2016
        • Июнь 2016
        • Июль 2016
        • Август 2016
        • Сентябрь 2016
        • Октябрь 2016
        • Ноябрь 2016
        • Декабрь 2016
      • 2015
        • Январь 2015
        • Февраль 2015
        • Март 2015
        • Апрель 2015
        • Май 2015
        • Июнь 2015
        • Июль 2015
        • Август 2015
        • Сентябрь 2015
        • Октябрь 2015
        • Ноябрь 2015
        • Декабрь 2015
    • Подписка
    • КНИГИ
      • Цифровизация
        • Дайджест №1-2024
    Нефтепродукты, нефтехимия, нефтепереработка. Мир Нефтепродуктов. Научно-технический журнал
    Новости

    Синтезис 2025: наука и индустрия формируют нефтегазохимию будущего

    20.05.2025
    Новости

    29 мая в Москве обсудят зависимость НПЗ от зарубежных технологий и оборудования

    18.05.2025
    Новости

    Выставка «Шины, РТИ и каучуки-2025»

    18.05.2025

    Новые Статьи

    • Все
    • Новости
    • Выставки
    • Конференции
    18.05.2025

    ПМГФ-2025: Новые горизонты и технологии газовой отрасли

    C 7 по 10 октября 2025 года в Санкт-Петербурге на площадке конгрессно-выставочного центра «Экспофорум» состоится…

    Читать далее...
    05.05.2025

    Что будет на Международной конференции «Материалы и технологии в нефтегазовой отрасли»  —   рассказывают организаторы

    В России активно внедряют инициативы в рамках Нацпроекта «Новые материалы и химия», в связи с…

    Читать далее...

    29 мая состоится XV юбилейная конференция «Нефтегазопереработка-2025»

    Меньше месяца остается до открытия одного из самых авторитетных нефтегазохимических выставок страны

    «Защита от коррозии – 2025»: новые горизонты в борьбе с коррозией

    В Уфе состоится секция «Современные технологии и передовые инженерные решения в области трубопроводного транспорта»

    Крупнейшие проекты, стратегические партнёрства и перспективные решения для Дальнего Востока и Восточной Сибири

    РМЭФ-2025: инновации и ключевые решения для энергетической отрасли

    Последние новости про выставки

    Выставки
    13.05.2024

    Российская энергетика на пороге будущего

    С 24 по 26 апреля в Экспофоруме прошел XII Российский международный энергетический форум. В этом году мероприятие посетили 7000 человек…

    Читать далее...
    Выставки
    13.05.2024

    Итоги выставки «Шины, РТИ и каучуки-2024»

    С 15 по 18 апреля в Москве в ЦВК «Экспоцентр» проходила 26-я международная специализированная выставка «Шины, РТИ и каучуки-2024» – важное весеннее…

    Читать далее...
    Выставки
    13.05.2024

    Опубликовано подробное расписание деловой программы выставок Rosmould & 3D-TECH | Rosplast 2024

    Ведущие отраслевые выставки летнего сезона Rosmould & 3D-TECH и Rosplast 2024 пройдут 18-20 июня 2024 года в Москве, павильоне 1 МВЦ «Крокус…

    Читать далее...
    Выставки
    07.05.2024

    Рынок СПГ —  развитие, возможности и ограничения

    В рамках Российского нефтегазохимического форума и 32-я международной выставки «Газ. Нефть. Технологии» в Уфе состоится круглый стол на тему«Рынок СПГ…

    Читать далее...
    Загрузить еще

    Интересно

    20.05.2025

    Синтезис 2025: наука и индустрия формируют нефтегазохимию будущего

    18.05.2025

    29 мая в Москве обсудят зависимость НПЗ от зарубежных технологий и оборудования

    18.05.2025

    Выставка «Шины, РТИ и каучуки-2025»

    18.05.2025

    ПМГФ-2025: Новые горизонты и технологии газовой отрасли

    О Журнале
    О Журнале

    Научно-технический журнал «Мир нефтепродуктов» – специализированное периодическое издание научно-практического профиля.

    RSS
    Последние публикации
    20.05.2025

    Синтезис 2025: наука и индустрия формируют нефтегазохимию будущего

    18.05.2025

    29 мая в Москве обсудят зависимость НПЗ от зарубежных технологий и оборудования

    18.05.2025

    Выставка «Шины, РТИ и каучуки-2025»

    Подписаться на обновления

    Мы пришлем вам на почту уведомление о появлении новых публикаций на сайте

    © 2025 Журнал МИР НЕФТЕПРОДУКТОВ - neftemir.ru

    Type above and press Enter to search. Press Esc to cancel.